|Dimensions Inside:||19" (length) x 19" (width) x 6.5" (depth)|
|Shelf Size:||One (1) 17” x 17” x 5/8” Shelf - NOT INCLUDED|
|Max Temp:||Fires to 1700° F|
|Shipping Weight:||215# (Freight)|
- FREE SHIPPING in the contiguous US!
- 3-Key Digital Sentry Xpress Controller
- Deluxe Ceramic Fiber Top
- On/Off Safety Switch
- Built-in Stand
- Instruction Manual
- 2-year Limited Warranty
Paragon’s square CS-19D digital glass clamshell kiln is easy to load since the entire top section lifts out of the way. The CS-19D heats from the top for even heat distribution across the glass surface. The lid elements are completely embedded in a deluxe, lightweight ceramic fiber lid. The lid has no grooves. This does away with element pins and helps eliminate dust inside the kiln. Note: A firebrick lid is not available for the CS-19D because of the heavier weight. The CS-19D is dual-opening: You can open the kiln by lifting the kiln body and lid together or by lifting only the lid. Lift the kiln body out of the way to assemble glass directly on the shelf; open the lid to load glass over a slumping mold. Since the kiln lifts up and out of the way, you can assemble glass inside the kiln directly onto a shelf. Add stringers and frit to delicate designs without having to move the glass again. When the kiln is full, merely lower the kiln over the shelf. The kiln is easy to open because of three counter-weight springs mounted under the base. The kiln base extends 4” in the back to support the weight of the kiln when in the open position. The base comes with mar-proof rubber feet. When opening the CS-19D kiln body, the body and lid must stay together. The kiln is equipped with safety latches on the side: The gravity-operated top latch holds the lid closed when lifting the body; the lever-operated bottom latch holds the kiln body closed when lifting the lid.