Jen-Ken Kiln - Ceram-a-Glass 2422 (AF)
|Model:||Jen-Ken Ceram-a-Glass 2422 (AF)
|Inside Dim:||24" (width) x 22" (depth)|
|Shelf Size:||21" Round Shelf - (not included)
Fires to 1700° F (glass) / 2100° F - 2300° F (ceramic)
see text below
|Ship Wt:||350# (Motor Freight)|
- FREE SHIPPING in the contiguous US!
- 12-key Digital Orton Controller
- JUMP START Programming
- 2-position Lid Prop for venting
- High Temperature Lid Coating
- Steel Stand
- Mechanical Relays
- Instruction Manual
- 2-Year Limited Warranty
The Jen-Ken AF Ceram-a-Glass 2422 kiln is designed for the artist that has a passion for all the fired arts! This kiln that has BOTH Ceramic and Glass firing modes. The Glass mode gives the perfect uniform top blast of heat to the glass on the shelf with some of the side coils working to help bring the kiln to temperature. The Ceramic mode is all side firing which is perfect for ceramics and glazes. The Ceramic mode works for glass casters too by keeping the kiln at a solid and toasty 1700°F without overheating the lid coils. A Totally compatible package in a perfect sized kiln!
The shelf kit is important to have if.... you are planning to fire clay and glass. You'll want different shelves for glass and clay, plus you'll want tall posts to lift the shelf up higher when you are working with glass!
**IMPORTANT INFORMATION - All Ceram-a-Glass model kilns from Jen-Ken have the capability to be run to 2300° F. This setting must be unlocked at the factory and be requested by the customer at the time of order. PLEASE SPECIFY IF YOU'D LIKE THIS OPTION! It's important to know that when running the kiln over 2100° F the lid elements are subject to faster wear and may not last as long. Element life is not guaranteed when the High Temperature Bypass Option is enabled.
Why Upgrade from Mechanical Relays to Solid-State Relays?
Mechanical Relays, which come standard on most kilns have internal moving parts which over time wear out and need to be replaced. Kiln manufacturers recommend you replace your mechanical relays approximately every 2 years. Solid-state relays have no moving parts and last far longer than standard mechanical relays and offer far better temperature control during hold times. Since solid-state relays also have no moving parts to wear out, they NEVER need to be replaced. You will notice that solid-state relays are silent. The only sound you will hear is just the reassuring hum of the heating elements. So, this factory upgrade saves you potential down time from having to wait for new relays to arrive, potential over-fires from relays sticking in the closed position, potential aggravation from having to learn how to remove and replace the mechanical relays yourself. We think this upgrade is well worth the cost and will save you time and aggravation over the life of your kiln.