Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
| Model: | Paragon Caldera Digital |
| Dimensions Inside: | 8" (length) x 8" (width) x 6.75" (depth) |
| Dimensions Outside: | 13" (width) x 19.5" (depth) x 13.75" (height) |
| Shelf Size: | 7" Square Shelf - NOT INCLUDED |
| Elements: | Side Elements |
| Max Temp: | Fires to 2350° F |
| Voltage: | 120 volts |
| Amperage: | 14 amps (You can plug it into most household outlets) |
| Watts: | 1680 watts |
| Receptacle: | 5-15R |
| Shipping Weight: | 50# (UPS) |
***Looking for a Vitrigraph stand... we suggest using the Seville Classics UltraDurable Commercial-Grade 5-Tier Steel Wire Shelving. Set it up using the top and bottom shelves only... and you are good to go! It's tall, portable, and perfect! This is what the pro's use, and you won't be sorry for getting it. Honestly, don't go trying to rig up a ladder and some boards, etc. because you don't want to spend extra dollars, or you think it will take up too much room. Whatever you set up will end up being an obstacle to you using your vitrigraph because it will be a PAIN to set up and break down. Trust us! We've been there. Save yourself some hassle!
Warning for the Caldera Kiln Equipped with a Lid Safety Switch and Collar
The Paragon Caldera high-fire digital kiln was intended to be a stackable kiln with a separate lid and bottom. However, the lid must be hinged to the Caldera body when a lid safety switch is installed. To stabilize a Caldera kiln that has a hinged lid, we attach the kiln body and kiln bottom with two latches.
If an unlatched collar (enameling, bead, or extension) is mounted between the Caldera body and the kiln bottom, care must be taken when opening the hinged lid. Do not open the lid past 90 degrees (where the lid is straight up) unless the lid leans against a heat-proof support behind the kiln.
Please be aware when firing the Caldera with any collar in place, the maximum temperature is reduced. Enameling Collar – 1800°F; Bead Collar – 2000°F; Extension Collar – 2000°F
Optional Glass Window
You can order your Caldera with an optional glass window in the top/lid. The glass window is rated at 2300°F (1260°C), so it can easily withstand glass fusing temperatures. Please note, however, that the window reduces the kiln’s maximum temperature to approximately 2100°F (1148°C) and is meant for glass fusing. (You can still fire porcelain and stoneware jewelry even with the window, but you will need to plug the window with ceramic fiber.)
Want to know more? Here's the trusty manual for the Caldera!
Steel Stand, Stackable Design
The Paragon Caldera digital high-fire kiln can fire rapidly to 2350°F/1287°C. and ships with a sturdy 2 3/4" high x 14" x 12 3/4" steel stand, complete with mar-proof rubber feet. With a separate top and bottom, the Caldera is stackable and completely portable.
Strong Lap Joints
To strengthen the firing chamber, the firebrick corners are fitted together with L-shaped notches. This type of joint lasts longer than the butted joint and the "picture frame" mitered joint found on competitive brands. The base is versatile and can be flipped if one side is damaged. The lid and base are interchangeable unless you order the lid with a glass window.
Reliable Construction
The Caldera switch box is coated with a durable high temperature, water-based finish. Elements are coiled from the finest high-temperature wire available. They use heat-dissipating element connectors refined and proven over many years in Paragon kilns. The thermocouple is protected with a high-nickel stainless steel sheath for long life.
Expansion Collars
The basic Caldera is part of a kiln expansion system...
Caldera-BC Bead Annealing Collar - When you are ready to anneal glass beads, add the modular Caldera-BC Bead Annealing collar. The Caldera-BC collar has a 7 ½” x 2” door on the side for annealing glass beads. The Caldera-BC collar adds 4 ½” of height to the main kiln. The collar has no heating elements and, will fire to 2000°F/1093°C.
Caldera-X Blank Collar - The Caldera-X collar is a kiln section that stacks onto the Caldera, adding 4 ½” of height. The Caldera-X has no heating elements and, will fire to 2000°F/1093°C. It is designed to add extra space for low-fire projects such as glass slumping.
- This collar adds 6 3/4” of height to the kiln. The Caldera-E collar has a 7 ½” x 4” copper enameling door on the side. Now you can explore the exciting art of copper enameling without having to buy a front-loading enameling kiln. The kiln ships with a rare earth magnet to hold the enameling door open, and a stainless steel bead mandrel holder. The mandrel holder attaches to the front of the kiln. The Caldera-E collar has no heating elements. For this reason, the Caldera-E collar will slow down the firing rate and reduce the maximum temperature to 1500°F (815°C).
Vitrigraph Bottom for a base with a 1 1/2" or 2" hole...
This is my 3rd Paragon kiln and there is a reason for that...durability, dependability and never a problem. Im.sure my new Caldera will be with me a long time as well. I have fired it twice in 2 days and it's firing right on target temp. I bought the Caldera because of the temperature range. It fires up to cone 6 . I make small items and don't want to fire my large kiln for just a few tiny items.
I absolutely love this kiln and am so glad I purchased it.
Hey Nancy,
We are glad you are enjoying your Caldera so much! The Caldera is actually one of the very few 120V kilns that can fire to Cone 10, not only Cone 6. Thanks for sharing your feedback! We appreciate your input. If you have more details or suggestions, feel free to reach out at customerservice@kilnfrog.com or via phone 361-596-3764.
Easy and joyful!
Hello,
We're happy to hear that you are enjoying the product! Thanks for your review! We value your input. If you have more to share, contact us at customerservice@kilnfrog.com or via phone 361-596-3764.
Kiln Frog delivered my kiln very fast, super service and really helpful staff. Will definitely be using them again for future purchases. Houston TX.
Thanks for your feedback! Your insights are valuable. Share more thoughts or suggestions via email at customerservice@kilnfrog.com or call 361-596-3764. Your input enhances our service. Looking forward to hearing from you!
This is our first kiln and are very happy with it. At first it was daunting, with all the pieces, but the on-line videos and documentation on the controller are very helpful. The app for the controller is great too, here in Florida we can put it outside when using so got a rollable cart that lets us bring it in and out.
There's also many extras available for it as we advance with using it.
Very nice!
Thanks for sharing your feedback! We appreciate your input. If you have more details or suggestions, feel free to reach out our customerservice@kilnfrog.com or via phone 361-596-3764.
I have several, and I would hghly recommend them. Easy to use and trouble-free.
Thank you for taking the time to provide your feedback! Your insights are important to us. If you have more thoughts or suggestions you'd like to share, we'd love to hear them. Feel free to connect with us through email at customerservice@kilnfrog.com or give us a call at 361-596-3764. We're here to ensure your experience with us is exceptional, and your input helps us achieve that. Looking forward to hearing from you!
Join Our Newsletter
Sign up to receive insider discounts, updates on new arrivals, special offers, and other juicy information.
