Tel: 361-596-FROG (3764)|Email: kilnfrog@gmail.com|Free Shipping*
Cart 0
Paragon Kiln - F240 - kilnfrog.com

Paragon Kiln - F240

$ 2,476.49 $ 3,131.51

Model: Paragon F240
Dimensions Inside: 18" (width) x 18" (depth) x 13" (height)
Dimensions Outside: 29" (width) x 34.5" (depth) x 29" (height)
Shelf Size: 16" x 14" - NOT INCLUDED
Elements: Side Element Only
Max Temp: Fires to 1700° F
Voltage: 240 volts
Amperage: 20 amps
Watts: 4800 watts
Receptacle: 6-20R
Shipping Weight: 346# (Freight)

 

Includes:

  • FREE SHIPPING in the contiguous US!
  • Sentry Xpress 3-key Controller 
  • Solid State Relays - NEW! Standard on all F240 Models!
  • On/Off Safety Switch - NEW! Standard on all F240 Models!
  • 2” Thick Ceramic Fiber Punty Rod Doors
  • Slide-Out Mandrel Holder with 14 Slots
  • 3" Thick Firebricks

Anneal large glass figurines in the digital F-240 lamp working kiln. Raise the spring-loaded vertical-drop door to insert a glass figurine with a punty rod. Lower the door. The punty rods or mandrels will extend outside the firing chamber through the small punty rod doors. This allows even large glass pieces to anneal safely.

 

Punty rod doors retain the heat

Two 4” x 7 1/2” punty rod doors will give you plenty of room to work with. Because of a gap under the punty rod doors, you can usually close them all the way even when mandrels extend past the firing chamber. Two layers of woven gaskets under each door help to hold in the heat. Powerful rare-earth magnets hold the punty rod doors in the open and closed positions. To help retain heat, the ceramic fiber punty rod doors are two inches thick.

 

Slide-out mandrel holder

We have added an adjustable mandrel holder to the front of the kiln. Adjust it horizontally and vertically without tools. Position the heavy-duty welded mandrel holder from 1 1/4” to 12” from the front edge of the main floor. (A firebrick extension on the front of the kiln fits under the punty rod doors beyond the front edge of the kiln floor.) Then tighten the mandrel holder with the thumbscrews on each side of the kiln. The holder slides inside steel tubes mounted in the base of the kiln. The stainless steel mandrel rest, which includes 14 slots, can also be adjusted vertically.

 

Thicker firebricks in the F-240

The firebricks in the roof, walls, door, and bottom are 3” thick. This is 20% more insulation than the standard 2 1/2” firebricks in the walls and bottom of our earlier F-240 kilns. The extra insulation enables the F-240 to maintain a temperature hold with greater ease. A firebrick ledge extends 3” past the punty rod doors as a handy working surface.

 

Safety testing

For your safety, the F-240 is rigorously tested by TUV to meet UL and CSA standards. TUV is Germany’s leading testing lab. We can make the F-240 for any electrical system in the world. The F-240 includes safety on/off switch for your convenience. Electrical components stay cool in a slotted base. No extra stand is needed for your kiln.

 

Solid State Relays

The F240 has solid-state relays that are mounted to aluminum heat sinks. SSR's last far longer than standard mechanical relays and offer better temperature control during holds. SSR's also have no moving parts to wear out. You will also notice is that SSR's are silent. The only sound you will hear just the reassuring hum of the heating elements.


Share this Product

Sale

Unavailable

Sold Out