|Model:||Jen-Ken AF3P Cube|
|Inside Dim:||9" (length) x 9" (width) x 9" (depth)|
|Shelf Size:||8" Square Shelf|
|Max Temp:||Fires to 1700° F|
|Ship Wt:||70# (UPS)|
- FREE SHIPPING in the contiguous US!
- 3-key Digital Orton Controller
- JUMP START Programming
- Shelf Kit: 1 full shelf, 3 each 1/2" posts, and kiln wash
- High Temperature Lid Coating
- Mechanical Relays
- Instruction Manual
- 2-Year Limited Warranty
The Cube is a versatile kiln is a workhorse. It is perfectly powered for it's size. It is also nice and deep allowing you to fire a metal clay carbon vessel inside. In addition, you can slump and drape small items, make tons of glass jewelry and fire ceramics up to 8" tall! It's incredible! Just look at all the different variations...
Add the "take-a-part" feature and this kiln comes apart to allow you to utilize your maximum creativity! The Cube is great for metal clay, fusing glass jewelry, glass bracelets, enameling, ceramics, and it comes apart so that you can make vitrograph, too... talk about multi-function! Plus, it is also good for making samples and test tiles because of its speed.
Why Upgrade from Mechanical Relays to Solid-State Relays?
Mechanical Relays, which come standard on most kilns have internal moving parts which over time wear out and need to be replaced. Kiln manufacturers recommend you replace your mechanical relays approximately every 2 years. Solid-state relays have no moving parts and last far longer than standard mechanical relays and offer far better temperature control during hold times. Since solid-state relays also have no moving parts to wear out, they NEVER need to be replaced. You will notice that solid-state relays are silent. The only sound you will hear is just the reassuring hum of the heating elements. So, this factory upgrade saves you potential down time from having to wait for new relays to arrive, potential over-fires from relays sticking in the closed position, potential aggravation from having to learn how to remove and replace the mechanical relays yourself. We think this upgrade is well worth the cost and will save you time and aggravation over the life of your kiln.