|Model:||Paragon PAF10-1 Glass Annealing Kiln
|Dimensions Inside:||35" (width) x 27" (height) x 29" (depth)|
|Dimensions Outside:||56" (width) x 46" (depth) x 45" (height)|
|Elements:||Side and Back Elements Only|
|Max Temp:||Fires to 1100° F|
|Voltage:||240 volts / Single Phase
|Shipping Weight:||757# (Freight)|
- FREE SHIPPING in the contiguous US!
- 3-Key Digital Sentry Xpress Controller
- K-Type thermocouple
- Built-in Stand
- Instruction Manual
- 1-year Limited Warranty
Expand the production capacity of your glass studio with the massive 16-cubic-foot PAF10-1 glass annealing kiln. Make glass vases, bowls, and figurines without worrying about having enough annealing capacity.
The PAF10-1 is designed for annealing, so the maximum temperature is 1100°F (593°C). With this kiln, you are buying only the heating capacity that you need for annealing.
The PAF10-1 is stackable. As your business grows, add another PAF10-1 without using more floor space. The feet of the top kiln fit into the four stacking points of the bottom kiln. Level the kiln in minutes with levelers that are built into the feet.
Spring-loaded quick-release door latches allow one-handed loading into the hot kiln. The doors open smoothly on heavy-duty 3/4” hinge shafts. The firing chamber opening is lined on all four sides with a fiber rope door seal. The doors also each have a seal where the doors meet in the center. Each door has a safety switch that turns off the elements when the door is opened. The controller remains powered and automatically resumes firing when you close the doors.
The kiln heats from the sides and back. Dropped, recessed brick grooves protect the elements for long life. The kiln is heavily insulated for economical operation. The insulating firebricks and fiberboard, wrapped in heavy-gauge steel, soak up heat for slow, efficient cooling:
Paragon’s PAF10-1 is made for years of rigorous firing with a heavy 2” tubular steel frame. A heat shield and 1 3/4” air gap between the kiln and ventilated switch box help keep electrical components cool for long, trouble-free service. Costly heavy-gauge nickel-plated copper wiring is covered with high temperature glass-braided insulation. Turn off power to the controller when the kiln is not in use using an on/off switch on the control panel.
Thermocouple with “special limit” wire
The thermocouple senses temperature inside the kiln. It is the small rod that extends into the firing chamber. The ¼” wide Type-K, 14-gauge, exposed-tip thermocouple is made with special-limit wire for superior accuracy. The exposed tip gives the controller a fast response time for even temperatures during holds. The thermocouple is made in America to our exacting standards.
Designed for production
Paragon’s warranty is not affected by the frequency of use. Fire your new kiln every day if you want, even in commercial settings. That will have no effect on the warranty period.