Tel: 361-596-FROG (3764)|Email: kilnfrog@gmail.com|Free Shipping*
Cart 0
Paragon Kiln - Janus27 - Kiln Frog

Paragon Kiln - Janus27

$ 2,901.58 $ 3,555.86

Model: Paragon Janus27
Dimensions Inside: 28" (width) x 22.25" (depth)
Shelf Size: Six C-24H Half Shelves (26” round x 3/4” half) - NOT INCLUDED
Elements: Top and Side Elements
Max Temp: Fires to 2350° F 
Voltage: 240 volts 
Amperage: 48 amps 
Watts: 11200 watts 
Receptacle: 6-50R
Shipping Weight: 420# (Motor Freight)

 

Includes:

  • FREE SHIPPING in the contiguous US!
  • 12-Key Digital Sentry 2.0 Controller
  • Glass/pottery selection switch 
  • 3” insulating refractory firebrick walls 
  • Sidewall elements in dropped, recessed brick grooves are easy to replace
  • Tapered peepholes for a wide view 
  • Kiln stand
  • One year limited warranty 
  • Available in 240, 200, 208, or 380 volt, 50 or 60 hertz, single or 3 phase

The Paragon Janus27 is a multi-function kiln that can fire both pottery and glass. Heating elements are mounted in the top and sidewalls. It is the big sister to the Janus23, with almost double the interior space. 

Select between glass and pottery with the flip of a switch. With the switch in the glass position, heat comes from the top elements and the middle sidewall element. With the switch in the pottery position, heat comes from only the sidewall elements.

In the glass mode, fuse and sag large glass projects placed on a single shelf. In the pottery mode, fire to cone 10. You can also fire several shelves of smaller glass pieces using the pottery mode.

The elements in the lid are mounted in a firebrick “ball” groove that eliminates element pins. The element coils are wider than the groove opening, so the elements stay in place without pins. The groove dissipates heat efficiently.

The lid on the Janus-27 is easy to lift with the exclusive, patented Paragon spring counter-balance. For easier maintenance, we use 2” high blank wall bricks in the top row of the Janus-27. Since the brick is without element grooves, it is less susceptible to damage during loading.

The patented control box on the Janus-27 opens forward for easy maintenance. A folding support arm holds the box in the open position. The control box is finished in a durable high temperature, water-base blue paint. We chose water-base paint because of the low emissions during spraying. This creates a safer working environment for our employees and cuts down on pollution.

Will you anneal glass for long periods in your Janus-27? Then we recommend the mercury relay upgrade. The mercury relays found on our large industrial kilns outlast mechanical relays. The life of the quiet, reliable mercury relay has been measured in millions of on/off cycles. Please call for a price on the mercury relay upgrade.

The thermocouple is protected with a high-nickel stainless steel sheath for long life.

A heavy galvanized steel base covers the reversible brick bottom completely. It folds up under the stainless case on all sides to strengthen the firing chamber. This is one more assurance that your Paragon kiln is built to last.

Wires are fastened to the elements with heat-dissipating connectors refined and proven over many years in Paragon kilns. Elements are coiled from the finest high-temperature wire available.

Large, tapered peepholes offer a wide view of the firing chamber with little heat loss. The peepholes, both sides of the lid and top rim of sidewall firebrick are hardened and sealed with a special refractory coating to protect the ware from dust.

Heavy Duty Rolling Stand Included, 32” Square x 12” High
A deluxe kiln stand with locking casters is included at no extra charge. Enjoy the convenience of rolling the kiln out of the way when not in use. The stand is rock solid and ships assembled. It fits together with interlocking components for extra strength.

Share this Product

Sale

Unavailable

Sold Out