|Dimensions Inside||16.5" (width) x 13.25" (depth)|
|Shelf Size:||15" Round Shelf - NOT INCLUDED|
|Max Temp:||Fires to 2350° F|
|Shipping Weight:||198# (freight)|
- FREE SHIPPING in the contiguous US!
- Sentry 12-key Controller
- Lock-in lid support with a positive catch
- Wide-view tapered peepholes
- Ventilated, louvered switch box
- Two hand lifts
- Heavy-duty kiln stand with mar-proof plastic feet
- Full-formed, galvanized steel base
- Fall-away two-stage Prop-R-Vent
- Coated lid, peepholes, and rim of firebricks
- Heavy-gauge stainless steel case
- Full firing capacity: fire ware directly on the brick bottom
- Reversible brick bottom
- Dropped, recessed brick grooves, which eliminate element pins
- One year limited warranty
The TNF1613 3" wall kiln is designed for porcelain, so it easily fires ceramics, china paint, decals, and gold. The size is ideal for teachers of china paint or dolls. The 8-sided, 16 ½” wide and 13 ¼” deep interior is as tall as standard 7-sided kilns. The TNF-1613-3 kiln is 43% larger than the 66-3 series, yet costs only a few dollars more.
Thermocouple with “special limit” wire
The TNF-1613-3 plugs into a 30 amp, 240-volt outlet. It uses 6400 watts of power, more watts per cubic foot than conventional kilns. The extra wattage helps compensate for aging elements or low voltage. This extra power is ample for cone 10 and, if desired, rapid heating. Elements last longer because the extra wattage and thicker 3" firebricks help the elements reach porcelain temperatures without strain.
The thermocouple senses temperature inside the kiln. It is the small rod that extends into the firing chamber. The ¼” wide Type-K, 14-gauge, exposed-tip thermocouple is made with special-limit wire for superior accuracy. The exposed tip gives the controller a fast response time for even temperatures during holds. The thermocouple is made in America to our exacting standards.
Kiln Comes with Heavy Duty Rolling Stand, 18” Square x 12” High
A deluxe, rock-solid kiln stand with locking casters is included at no extra charge. You will enjoy the convenience of effortlessly moving the kiln out of the way when not in use.
The stand has a mounting bracket for the Orton Kiln Vent and a greenware drying rack. To install an Orton Kiln Vent, slide the vent collection cup into the vent bracket. The new stand eliminates the need for the collection cup mounting bolt.
Take advantage of the heat that radiates from the kiln. Load greenware on the lower shelf. The heat from the kiln will dry the ware to prepare it for the next firing. Save the time and electrical expense of drying the ware inside the kiln.
Assemble the stand with simple tools. The stand slides together with interlocking components that assemble with one size of bolt.