Tel: 361-596-FROG (3764)|Email: kilnfrog@gmail.com|Free Shipping*
Cart 0
Paragon Kiln - Janus1613 (READY to SHIP)

Paragon Kiln - Janus1613 (READY to SHIP)

$ 1,759.06 $ 2,069.48

Model: Paragon Janus1613
Dimensions Inside 16.5" (width) x 13.25" (depth)
Shelf Size: 15" Round Shelf - NOT INCLUDED
Elements: Side Elements
Max Temp: Fires to 2350° F 
Voltage: 240 volts 
Amperage: 20 amps
Watts: 4800 watts 
Receptacle: 6-20R 
Shipping Weight: 205# (freight)

 

Includes:

  • FREE SHIPPING in the contiguous US!
  • Sentry 12-key Controller
  • Glass/pottery selection switch
  • 3” insulating refractory firebrick walls
  • Sidewall elements in dropped, recessed brick grooves are easy to replace
  • Tapered peepholes for a wide view
  • Steel floor pan supports the entire brick bottom of each kiln
  • One year limited warranty

The Paragon Janus-1613 can fire both pottery and glass. Heating elements are mounted in the top and sidewalls.

Select between glass and pottery with the flip of a switch. With the switch in glass mode, heat comes from the top elements and the middle sidewall element. With the switch in pottery mode, heat comes from only the sidewall elements.

In the glass mode, fuse and sag large glass projects placed on a single shelf. In the pottery mode, fire to cone 10. You can also fire several shelves of smaller glass pieces using the pottery mode.

The elements in the lid are mounted in a firebrick “ball” groove that eliminates element pins. The element coils are wider than the groove opening, so the elements stay in place without pins. The groove dissipates heat efficiently, evenly radiating heat onto the glass.

The thermocouple, which senses the temperature inside the kiln, is protected with a high-nickel stainless steel sheath for long life.

A heavy galvanized steel base covers the reversible brick bottom completely. It folds up under the stainless case on all sides to strengthen the firing chamber. This is one more assurance that your Paragon kiln is built to last.

A kiln stand is included at no extra charge. The stand is complete with mar-proof plastic feet.

The Janus-1613 control box is finished in a durable high temperature, water-base blue paint. We chose water-base paint because of the low emissions during spraying. This creates a safer working environment for our employees and cuts down on pollution.

Wires are fastened to the elements with heat-dissipating connectors refined and proven over many years in Paragon kilns. Elements are coiled from the finest high-temperature wire available.

A large, tapered peephole offers a wide view of the firing chamber with little heat loss. The peephole, both sides of the lid and top rim of sidewall firebrick are hardened and sealed with a special refractory coating to protect the ware from dust.

 

Kiln Comes with Heavy Duty Rolling Stand, 18” Square x 12” High

A deluxe, rock-solid kiln stand with locking casters is included at no extra charge. You will enjoy the convenience of effortlessly moving the kiln out of the way when not in use.

The stand has a mounting bracket for the Orton Kiln Vent and a greenware drying rack. To install an Orton Kiln Vent, slide the vent collection cup into the vent bracket. The new stand eliminates the need for the collection cup mounting bolt.

Take advantage of the heat that radiates from the kiln. Load greenware on the lower shelf. Heat from the kiln will dry the ware to prepare it for the next firing. Save the time and electrical expense of drying the ware inside the kiln.

Assemble the stand with simple tools. The stand slides together with interlocking components that assemble with one size of bolt.

 

    Customer Reviews

    Based on 2 reviews Write a review

    Share this Product

    Sale

    Unavailable

    Sold Out