|Inside Dim:||12" (width) x 12 (height) x 10" (depth)|
|Outside Dim:||17" (width) x 18.5" (depth) x 23" (height)|
|Shelf Size:||9" x 7” Rectangular Shelf - NOT INCLUDED|
|Max Temp:||Fires to 1700°F|
|Amperage:||15 amps (20 amp breaker required)|
|Ship Wt:||135# (Freight)|
- FREE SHIPPING in the contiguous US!
- 3-Key Digital Bartlett Controller
- Peephole Plugs
- Pilot Light
- Attached Stand
- Stainless Steel Jacket
- Mechanical Relays
- Instruction Manual
- Two-year warranty
The 1210FLE is a compact portable front loader, electric kiln designed with fiber walls and floor. The lid element is set securely in the top of the kiln eliminating the fear of a mandrel hitting an electrical part. Easy accessibility is possible with guillotine door lift and lower punty door, which flips down for annealing pieces.
Fiber walls will smoke and produce some odor on the initial firing which will dissipate after the first firing. The first firing is recommended to do outdoors or open all doors and windows in the room where the kiln is located. Odors are not toxic and future firings will not be affected.
Furniture Kits for Front Loading electric models provide 2-3 layers of shelving, assorted posts, and a one-pound bag of kiln wash. Choose the standard furniture kit or build your own with shelves and posts the quantities required.
Why Upgrade from Mechanical Relays to Solid-State Relays?
Mechanical Relays, which come standard on most kilns have internal moving parts which over time wear out and need to be replaced. Kiln manufacturers recommend you replace your mechanical relays approximately every 2 years. Solid-state relays have no moving parts and last far longer than standard mechanical relays and offer far better temperature control during hold times. Since solid-state relays also have no moving parts to wear out, they NEVER need to be replaced. You will notice that solid-state relays are silent. The only sound you will hear is just the reassuring hum of the heating elements. So, this factory upgrade saves you potential down time from having to wait for new relays to arrive, potential over-fires from relays sticking in the closed position, potential aggravation from having to learn how to remove and replace the mechanical relays yourself. We think this upgrade is well worth the cost and will save you time and aggravation over the life of your kiln.
Check out the Olympic Kilns Electrical Parts Kits... never experience downtime again because you didn’t have a part on hand!