|Dimensions Inside:||25" (width) x 15" (depth) x 8" (height)|
|Dimensions Outside:||36" (width) x 28" (depth) x 24" (height)|
|Shelf Size:||(2) Side by Side 12" x 12" Shelves - NOT INCLUDED
|Elements:||Top Element Only|
|Max Temp:||Fires to 1700° F|
|Shipping Weight:||280# (Freight)|
- FREE SHIPPING in the contiguous US!
- Sentry Xpress 3-key Controller
- Solid State Relays - NEW! Standard on all F200 Models!
- On/Off Door Safety Switch - NEW! Standard on all F200 Models!
- 1 1/4” Thick Ceramic Fiber Punty Rod Doors
- Mandrel Holder with 19 Slots
- Coated Firebricks
- Built-in Stand with plastic feet
This kiln is a beast! The Paragon F-200 is a true high-performance kiln and is like having two kilns instead of one. The 2” tall, 11” wide double doors give you 22” of width for inserting bead rods and, with the element in the top, you can fuse and slump glass up to 6” tall. When you raise the spring-loaded vertical-drop door to insert a glass figurine with a punty rod, the punty rod can extend outside the firing chamber through the smaller punty rod door thus allowing the glass to anneal safely.
It has durable insulating firebricks in the roof, walls, and floor. The element is mounted in the top of the kiln and seated in pinless grooves for safety. There is no sidewall element. The thermocouple, which senses temperature inside the kiln, is protected with a high-nickel stainless steel sheath for long life. No extra stand is needed; the built-in base stays cool even during extended hold times.
Stainless Steel Wax Trays
Use a Stainless Steel Wax Tray, 14″ x 14." This Stainless Steel Wax Tray system will fit well in your kiln and allow you to do lots of production work. Place molds on the removable expanded metal top. The wax will drip from the molds. Then remove the wax tray before the kiln gets hotter than 300°F / 148°C. Note: Burning wax inside a kiln can damage the firebricks. Check out a 14" x 14" Stainless Steel Wax Tray to fit in Paragon F200 kiln here.
Click here to explore more Kiln Accessories.
Solid State Relays
The F200 has solid-state relays that are mounted to aluminum heat sinks. SSR's last far longer than standard mechanical relays and offer better temperature control during holds. SSR's also have no moving parts to wear out. You will also notice is that SSR's are silent. The only sound you will hear just the reassuring hum of the heating elements.