Model: |
Olympic Traveler 120v |
Inside Dim: | 11.5" (width) 11.5 (height) x 11" (depth) |
Outside Dim: | 23" (width) x 19" (depth) x 47.25" (height) |
Shelf Size: | 10” Square Shelf - NOT INCLUDED |
Max Temp: | Fires to 2000° F |
Voltage: | 120 volts |
Amperage: | 15 amps (Requires a 20 amp breaker) |
Watts: | 1800 watts |
Receptacle: | 5-20R |
Ship Wt: | 168# (Freight) |
Includes:
The 120-volt Olympic Traveler kiln comes equipped with an element in the lid for glass fusing and wall elements for low fire ceramics. The versatile Traveler has wheels attached to the frame which allows easy transportation of the kiln to a new location. The Traveler is built in sections but is not designed to come apart.
Why Upgrade from Mechanical Relays to Solid-State Relays?
Mechanical Relays, which come standard on most kilns have internal moving parts which over time wear out and need to be replaced. Kiln manufacturers recommend you replace your mechanical relays approximately every 2 years. Solid-state relays have no moving parts and last far longer than standard mechanical relays and offer far better temperature control during hold times. Since solid-state relays also have no moving parts to wear out, they NEVER need to be replaced. You will notice that solid-state relays are silent. The only sound you will hear is just the reassuring hum of the heating elements. So, this factory upgrade saves you potential down time from having to wait for new relays to arrive, potential over-fires from relays sticking in the closed position, potential aggravation from having to learn how to remove and replace the mechanical relays yourself. We think this upgrade is well worth the cost and will save you time and aggravation over the life of your kiln.
Check out the Olympic Kilns Electrical Parts Kits... never experience downtime again because you didn’t have a part on hand!